The Catalina
Classic Midcentury style with generous rooms & 10-Foot Ceilings
- 2,334 Square Feet, About 77 Ft x 42 Ft
- Flowing Living Spaces with Central 3-Sided Fireplace
- 3 Bedrooms
- 3.5 Bathrooms
- Single Story
- 2-Car Garage
The Catalina Model is suited for a full lot width and a left side loading garage entrance. The Living Room, Guest Suite, and Bonus Room open onto a large rear porch with beautiful full height windows that reach to the ten-foot ceilings that extend into all rooms. This elegant layout delivers a spacious master suite and two more generous sized bedrooms, each ensuite. A spacious Kitchen sits at the heart of the house with a sliding glass door opening into a Kitchen Garden. An island bar allows guests to converse while you prepare meals. Abundant storage space finishes off this design with a large pantry in the kitchen, a walk-in closet in the master suite, and places for coats along with two large linen and supply closets.
Purchase Options
See choices below to buy plans for this design. Prices based on habitable square footage of the house. You have the option to buy plans in a DWG format, which opens within most CAD software. Only skilled CAD designers should buy DWG files, or you may provide them to your designer, but first confirm DWG formats work for your designer. DWG files do not include annotation embedded within the file. DWG files are intended for altering the design to your preference.
$465
Study sets
PDF Format
- Just $0.20 / SF
- Allow 3 to 4 Days by Email
- Includes Overall Dimensions
- Presented at 1/8" Scale
- Floor Plan & Elevations
$995
CAD Files
DWG FORMAT
- Jumpstart Your Design for Under $1,000
- Allow 3 to 5 Days by Email
- For Experienced Pros Only
- Raw Plan Files, no Annotations
- Floor & Roof Plan, Elevations, & Section
$4,665
Full Set
pdf Format
- Just $2.00 / SF
- Allow 4 to 5 Weeks by Email
- Architectural Plans to Build
- Presented at 1/4" Scale
- See list of plans below
All Full Sets of plans are drawn at ¼” scale or larger and include :
* 1/4″ Foundation Plan: The foundation plan graphically describes the configuration of the base of the structure with dimensions and indicates structural supports as required by footings, columns, walls, and supports at bearing points.
* 1/4″ Floor Plan(s): Top-down two-dimensional drawings designating wall and room layouts with the door, window, and fixture symbols to indicate locations and sizing of the spaces. The floor plan Includes exterior, and interior dimensions and basic building code notes.
* 1/4″ Electrical Plan(s): Same graphics as the Floor Plan less the dimensions but with electrical symbols and annotations.
* 1/4″ Exterior Elevations: Two-dimensional illustrations of the four sides of the building with material indications, height dimensions, and exterior architectural elements.
* 1/4″ Building Cross-Section(s): A slice through the building illustrated in two-dimensional format to indicate vertical spatial relationships within the structure. These drawings help visualize how the structure assembles.
* 1/4 or 1/2″ Interior Elevations: Two-dimensional drawings indicating the layout of cabinets and plumbing fixtures with notes regarding architectural detail. The kitchen, bathroom, and laundry cabinet dimensions provided are a guide and may require adjustments based on your finish selections.
* 1/4″ Roof-Framing Plan: Two-dimensional illustrations of the top-down view with references to structural connections. Note that special conditions apply in seismically active and hurricane-prone regions and must be addressed locally and independently of these plans.
NOTE: “Full Sets” Imply that these documents include most of the information you need to build the house. Since these are not site-specific designs, your requirements can vary, and you must augment these documents with local stipulations.
